How To Flash Cherry Mobile Fusion Storm to Stock Firmware Using Actions Pad End User Upgrade V1.01

This tutorial will guide the step by steps that you should follow on How to Flash Cherry Mobile Fusion Storm to Stock Firmware Using Actions Pad End User Upgrade V1.01.Flash new firmware in your tablet if you encountered hang in logo or anything that could not fix by performing a Hard Reset.Just follow below step by steps guide to fix the problem.

How To Flash Cherry Mobile Fusion Storm to Stock Firmware Using Actions Pad End User Upgrade V1.01

1.Download and Extract Pad Firmware Upgrade Tool
2.Install Set-up.exe

3.Click Next and wait until complete installation

4.After Finish Installing,Go to Drive C>Program Files>Actions>Pad Firmware Upgrade>Product and Double click to open Pad Firmware Upgrade.

5.Now Click what shown in image and browse for Cherry_Fusion Storm_V1_20131029.fw

6.Press Upgrade

7.Power-Off Tablet and Connect to USB while pressing Volume up and down

8.Flashing now will start and wait until finish!

9.After successful flash,remove from USB and turn-on the tablet

Note:The first boot will take longer minutes,just wait!

Things to Remember .

Do not disconnect your tablet during flashing process. Charge your tablet more then 60% before flashing. Power failure during flashing may result dead tablet.

Note :- The above mention method was tested and find 100% working with Cherry Mobile Fusion Storm  tablet. However I did not find any trouble or difficulty during the flashing process but I do not take any responsibility.

Important File To Be Download:

Cherry Mobile Fusion Storm Stock Firmware
Pad Firmware Upgrade Tool

That's It Very Easy!

Something Wrong in my Post?Feel Free to comment Below!

Don't Forget to Like us on Facebook or Subscribe to us via E-mail