Flash your Tablet to Android 4.1.2 Using Odin Flasher if you have experiencing problem in your tablet like hangs,freezes,force close and hang in logo.Just follow instructions below on How To Flash or Update GT-P6200 To Android 4.1.2 Using Odin Flasher.
Tools, Drivers and Firmwares:
- Samsung P6200 Galaxy Tab 7.0 Plus Original Firmwares. You can also Download Firmware here
- USB Drivers.
- Odin Flasher ( P6200 ).
How To Update GT-P6200 To Android 4.1.2 Steps:
1. Extract The Downloaded Flasher,Firmwares package and USB drivers.
2. Install the USB drivers and Reboot your PC.
3. Run Odin Flasher and check these options: Re-Partition, Auto Reboot, F.Reset Time.
4. Click PDA and browse From the Extracted Firmware Package select the P6200XXME1_P6200OLBME1_P6200XXMC3_HOME.TAR.md5
5.At this Step you have to put the phone into Download Mode ( Volume Down + Power Key for 10 Sec ) then Press Volume Up Key to Enter Firmware Download Mode.
6. Connect USB cable to Phone and PC then install needed Drivers.
7. Make sure that the Odin Flasher Detects the COM number that the phone takes.
8. Click Start button to update the phone with these Firmware Files.
9. When all is Done in the right way the Odin Flasher will gives PASS! word In Green.
Now you can Remove cable from phone.
Do Full Reset by Code: *2767*3855#.
Here's The Samsung Galaxy Tab Plus:
That's It Very Easy!
Something Wrong in my Post?Feel Free to comment Below!
Don't Forget to Like us on Facebook or Subscribe to us via E-mail
Tools, Drivers and Firmwares:
- Samsung P6200 Galaxy Tab 7.0 Plus Original Firmwares. You can also Download Firmware here
- USB Drivers.
- Odin Flasher ( P6200 ).
How To Update GT-P6200 To Android 4.1.2 Steps:
1. Extract The Downloaded Flasher,Firmwares package and USB drivers.
2. Install the USB drivers and Reboot your PC.
3. Run Odin Flasher and check these options: Re-Partition, Auto Reboot, F.Reset Time.
4. Click PDA and browse From the Extracted Firmware Package select the P6200XXME1_P6200OLBME1_P6200XXMC3_HOME.TAR.md5
6. Connect USB cable to Phone and PC then install needed Drivers.
7. Make sure that the Odin Flasher Detects the COM number that the phone takes.
8. Click Start button to update the phone with these Firmware Files.
9. When all is Done in the right way the Odin Flasher will gives PASS! word In Green.
 |
| After finish flashing using Odin3 |
Now you can Remove cable from phone.
Do Full Reset by Code: *2767*3855#.
Here's The Samsung Galaxy Tab Plus:
 |
| Finish Product |
That's It Very Easy!
Something Wrong in my Post?Feel Free to comment Below!
Don't Forget to Like us on Facebook or Subscribe to us via E-mail
Comments
Post a Comment