Hey Good Day!I want to share now How To Flash Stock Firmware on Cherry Mobile Emerald,But before we proceed to flashing firmware,We must Perform first Hard Reset Using hardware Keys.Since this is MTK Chips powered,there should have a hard reset.First thing first,Let's take a look the Specifications of this phone.
1.3GHz MT6572 dual-core CPU
Mali 400 MP GPU
512MB RAM
4GB internal storage
up to 32GB via microSD
5 megapixel rear camera w/ Flash
0.3 megapixel front camera
Dual-SIM
HSPA+
WiFi 802.11 b/g/n
Bluetooth
1700mAh battery
You can have this for only Price: Php2,899
Cherry Mobile Emerald Specifications
Android 4.2 Jellybean
4-inch WVGA (800×480) LCD screen, 233ppi1.3GHz MT6572 dual-core CPU
Mali 400 MP GPU
512MB RAM
4GB internal storage
up to 32GB via microSD
5 megapixel rear camera w/ Flash
0.3 megapixel front camera
Dual-SIM
HSPA+
WiFi 802.11 b/g/n
Bluetooth
1700mAh battery
You can have this for only Price: Php2,899
Important Things To be Downloaded
Cherry Mobile Emerald DRIVERS
2. Press Volume Up + Volume Down + Power Button wait until appear Recovery and Factory Mode
3. Press Up to select Recovery mode wait until android comes out
4. Press Power button to go to Android system recovery
5. Use Volume Down to select wipe data/factory reset,press left sensitive keys to confirm
6. Select yes-delete all user data,again confirm by pressing left sensitive key
7.Reboot System
2.a. Extract the contents of the firmware on a folder of your choice
2.b. Extract the SP Flash Tool package on a folder of your choice.
3. Open SP Flash Tool (DO NOT CONNECT YOUR PHONE YET). - Flash_tool.exe
4. Click on "Scatter-loading" on the right side of the screen.
5. Choose your scatter file from the firmware package (MT6572_Android_scatter.txt
6. Click "Download" at the top
7. Turn off your phone. To be safe, remove the battery and put it back but DO NOT TURN ON THE PHONE.
8. Connect the phone to the PC. The progress bar should move and show some activity.
9. When finished, the SP FLASH TOOL will tell you it's complete
10. You may disconnect the phone, then turn it on.
11. VERY IMPORTANT! Place the phone anywhere safe and don't touch it while booting. The phone will UPGRADE the TOUCH PANEL. When asked if you would like to upgrade, tap Yes or Proceed or whatever to make it start, then let it sit there for about 30 minutes until it is upgraded. DO NOT ATTEMPT TO REMOVE THE BATTERY unless it has already been an hour. IF YOU DON'T FOLLOW THIS YOU MIGHT BRICK YOUR PHONE.
12. The phone might need to reboot. Try the touch panel. If it works, then congratulations, your upgrade is done.
How to Hard Reset Using Hardware Keys
1. Turn Off Phone2. Press Volume Up + Volume Down + Power Button wait until appear Recovery and Factory Mode
3. Press Up to select Recovery mode wait until android comes out
4. Press Power button to go to Android system recovery
5. Use Volume Down to select wipe data/factory reset,press left sensitive keys to confirm
6. Select yes-delete all user data,again confirm by pressing left sensitive key
7.Reboot System
How To Flash Stock Firmware on Cherry Mobile Emerald
1. Download and install the Cherry Mobile Emerald DRIVERS.2.a. Extract the contents of the firmware on a folder of your choice
2.b. Extract the SP Flash Tool package on a folder of your choice.
3. Open SP Flash Tool (DO NOT CONNECT YOUR PHONE YET). - Flash_tool.exe
4. Click on "Scatter-loading" on the right side of the screen.
5. Choose your scatter file from the firmware package (MT6572_Android_scatter.txt
6. Click "Download" at the top
7. Turn off your phone. To be safe, remove the battery and put it back but DO NOT TURN ON THE PHONE.
8. Connect the phone to the PC. The progress bar should move and show some activity.
9. When finished, the SP FLASH TOOL will tell you it's complete
10. You may disconnect the phone, then turn it on.
11. VERY IMPORTANT! Place the phone anywhere safe and don't touch it while booting. The phone will UPGRADE the TOUCH PANEL. When asked if you would like to upgrade, tap Yes or Proceed or whatever to make it start, then let it sit there for about 30 minutes until it is upgraded. DO NOT ATTEMPT TO REMOVE THE BATTERY unless it has already been an hour. IF YOU DON'T FOLLOW THIS YOU MIGHT BRICK YOUR PHONE.
12. The phone might need to reboot. Try the touch panel. If it works, then congratulations, your upgrade is done.
Comments
Post a Comment